Products and Services
Rapido 350 - 550 VA The RAPIDO range is the ideal solution for small office and home systems (SOHO) requiring over voltage and mains failure protection. The compactness, versatility (a push-button switch with LED-based mimic panel and user-replaceable batteries) and functionality of the RAPIDO allow it to easily fit into any small office and home environment. When the mains fails, connected loads are powered with a pseudo sine wave supply from the inverter. For additional security users can download a version of the Watch&Save 3000 UPS monitoring and control software. Please click here to download Rapido brochure
PC Planet 400 - 650 VA The PC PLANET series includes the 400-600-800VA models and uses digital technology. The load is powered from the mains through an AVR to stabilise brownout, sag and surge voltages, and EMI filters to suppress spikes and transients. When the mains fails, the load is powered by the inverter with a pseudo sinewave to provide sufficient runtime for computer system shutdown using the Watch&Save 3000 software supplied as standard. Please click here to download PC Planet brochure
Sentinel 6 700 - 3000 VA The SENTINEL 6 series includes the 700- 1000-1500-2000-3000VA models and uses double conversion technology (VFI). The load is powered continuously by the inverter with an EMI filtered, stabilised and regulated sinewave supply. The input and output EMI filters considerably increase the immunity of the load to mains disturbances and surges, even on bypass. The UPS can power the load for long periods (using battery extension packs) or provide sufficient runtime to allow shutdown of the protected systems using the Watch&Save 3000 software, supplied as standard. For outstanding power protection and communication SENTINEL 6 is the best solution for sensitive and “mission-critical” applications. Please click here to download Sentinel 6 brochure
Sentinel XR 3,3 - 10 kVA SENTINEL XR is the best solution for protecting medium sized networking applications which require the highest possible levels of reliability. The UPS is designed to support a wide applications from IT to security. SENTINEL XR is unique in that the UPS can be placed directly onto the floor or mounted in 19” rack mount cabinets. The range is available in 3300-4000-5000-6000- 8000-10000VA models. The UPS is primarily an on-line double-conversion (VFI) technology system with further selectable operating modes that can configure the UPS to protect applications including emergency lighting, security and medical systems.
Please click here to download Sentinel XR brochure
Sentinel XR Plus 5 - 10 kVA Sentinel XR Plus is the ideal solution for powering vital mission critical, sensitive loads such as electro-medical security applications in order to guarantee maximum reliability and availability. The series includes 5kVA-6kVA single/single phase and 6.5kVA-8kVA- 10kVA single/single phase and three/single phase models and uses double conversion on-line technology (VFI). The load is powered constantly by the inverter which supplies filtered, stabilised and regulated sinewave voltage. Moreover, the input and output filters increase the immunity of the load against mains power disturbances and lightning strikes. Sentinel XR Plus is without doubt one of the best UPS systems on the market today thanks to the technology used, the features (selectable Economy Mode and Smart Active Mode) and the diagnostics offered (custom LCD display, RS232 and USB interfaces complete with Watch&Save 3000 software, EPO contact and slots for optional interface boards). Please click here to download Sentinel XR Plus brochure
Flexus 10 - 120 kVA Flexus is ideal for the protection of critical information and telecommunications networks which cannot run the risk of being powered from a power quality electrical supply. The Flexus series is available in 10-12- 15-20 kVA three-phase or single-phase input and single-phase output models, and 10-12-15-20-30-40-100-120 kVA three-phase input and output models, with double conversion on-line technology according to the VFI-SS-111 classification, as defined by the IEC EN 62040-3 standard. Flexus has been designed and manufactured using state-of-the-art technologies in order to deliver maximum protection for critical users, a zero impact on the mains power supply and a high operating efficiency. The high level of flexibility at the design stage means that there is full compatibility both with three-phase power and with single-phase sources, thus eliminating any critical factors in the connection between UPS and system. Please click here to download Flexus brochure
Sentry Multistandard 10 - 80 kVA SENTRY MULTISTANDARD provides maximum protection for critical data processing networks and security applications, thanks to its advanced design, selectable operating modes and communications capabilities. Operating modes include: On-line, Economy, Smart-Active, Standby/Off and Voltage Stabilisation. Standard communications features include a front panel LCD with 128 potential messages, RS232 interfaces, EPO input, communications interface slot and Watch&Save 3000 management software. The SENTRY MULTISTANDARD series includes 60-80 kVA three-phase models, and uses on-line double conversion technology (VFI). The load is powered continuously by the inverter with a filtered, stabilised and regulated sinewave supply. The input and output filters considerably increase the immunity of the load to mains disturbances and surges, even on bypass. Please click here to download Sentry Multistandard brochure
Sentry HPS 8 - 100 kVA SENTRY HPS HM/HT provides maximum protection for vital ‘missioncritical’ networks, security applications (electro-medical) and industrial applications thanks to its outstanding mechanical and electrical design. The load is powered continuously by the inverter with a filtered, stabilised and regulated sinewave supply. The input and output EMI filters considerably increase the immunity of the load to mains disturbances and surges. The SENTRY HPS HM/HT series uses on-line double conversion technology (VFI) with an isolation transformer on the inverter output. SENTRY HPS HM/HT is supplied with Watch&Save 3000 software as standard and can be remotely monitored using the PowerNetGuard system from anywhere in the world. Additional battery extension packs allow the standard battery runtime to be extended up to several hours. Please click here to download Sentry HPS brochure
Sentry MPS 30 - 800 kVA SENTRY MPS is an on-line double conversion UPS (VFI SS 111 in accordance with IEC EN 62040-3) with a transformer isolated inverter. With a compact footprint and high power quality output, SENTRY MPS is designed to protect “mission critical” applications including data processing, telecommunications, industrial processes, security and electro-medical systems. SENTRY MPS is suitable for a wide range of applications including IT and the most demanding industrial environments suitable for power capacitive loads such as blade servers, without any reduction of the active power, from 0,8 lagging to 0,9 leading. With a broad of accessories and options, complex configurations and system architectures can be achieved to guarantee maximum power availability and the option to add new UPS without interruption to existing users. Using the AROS UPS Group Synchroniser (USG) and Parallel Systems Joiner (PSJ) sophisticated inter group parallel and redundant systems can be achieved to provide the highest possible levels of resilience and availability.
Please click here to download Sentry MPS brochure
Sentry MPS HP 100 - 250 kVA Thanks to the double conversion on-line technology achieved entirely with IGBT and DSP (Digital Signal Processor) control, the Sentry MPS-HP series guarantees maximum protection as well as high quality power for any type of IT and industrial load. It is especially suited for mission critical applications and is classed VFI SS 111 (Voltage and Frequency Independent) in compliance with IEC EN 62040-3 standards. This series, available in 100 to 250kVA models, has been designed using a new configuration that includes an IGBT rectifier with sinusoidal input current in place of the traditional thyristor rectifier.
Please click here to download Sentry MPS HP brochure
