Emmerich 3 phase - series iVolt Electric Stabilizer with new Solid State technology, we are ready to do the impossible, namely realizing stable electric voltage and super fast response to electric voltage fluctuations.
We reimagined every element to make it not only faster and modern, but also better. The result is more than just an electric stabilizer. This is the Stabilizer of the future.
The Emmerich series iVolt stabilizer comes with Solid-State technology, which means there are no moving parts (no carbon brush) for increased durability, faster and maintenance free. With Solid-State technology controlled by a Digital Signal Processor, the speed of stabilizing voltage can reach up to 50 times faster than traditional servo motor stabilizers.
iVolt introduces a True Digital 3 phase design that is fully digital, no moving parts, faster and maintenance free. iVolt is powered by an ARM® Cortex® 32 bit CPU Core Chip, the most reliable and intelligent chip ever in a Power Stabilizer. Experience True Digital 3 phase that was never possible before.
True Digital
Solid State Technology
No Moving Part
ARM® Cortex® 32-bit CPU Core
ISFD Display 5.1 inch
Dedicated Power Supply
Easy Bypass
True Digital Protection
Performance
Technical Specification
We call it True Digital technology. iVolt is powered by an ARM® Cortex® 32-bit CPU Core chip to receive and process sampling data on changes in electrical voltage quickly and provide fast and accurate responses to thyristors to carry out multi-tap switching on transformers to produce voltage that is always stable in super time. fast.
iVolt introduces the latest solid state technology that improves the most important functions of electrical stabilizers. With solid state, the speed in correcting fluctuating electrical voltages can be achieved in a very short time, beyond our imagination.
The speed in stabilizing extreme electrical voltages in iVolt is up to 50x faster than stabilizers with traditional servo technology motorcycle. With iVolt, all conditions of very fast and wide electrical voltage fluctuations can be handled more quickly and more responsively.
All of this is because it is solid state, making it possible for an electrical stabilizer unit to have no moving component parts in the transformer windings. No more periodic maintenance on carbon brushes and transformer winding surfaces. Make your time more productive and more efficient throughout the year.
With the ARM® Cortex® 32-bit CPU Core chip, iVolt reaches a new level in 3 phase power stabilizer performance. This is the most reliable and intelligent chip ever in a 3 phase electrical stabilizer unit. With high-speed memory capable of processing input voltage change sampling data very quickly, precisely and precisely. Not only that, thanks to the 32-bit ARM® Cortex® chip, the Emmerich series iVolt electric stabilizer is richer in features and interactive.
We believe that a good display panel on an electric stabilizer unit is a display panel that is large and clear and can display all information on electric voltage and usage load simultaneously and important status information on the electric stabilizer that is needed by the user. So in the iVolt, we designed everything needed to become a reality.
On the iVolt, the LCD display panel is a 5.1 inch Interactive Smart Function Display which is capable of displaying all Stabilizer status information in real time and interactively. You can easily monitor the input-output voltage and load simultaneously and in real time, even all important status information on the electrical stabilizer is also displayed in one ISFD Display.
The power supply used in conventional electric stabilizers is only powered by a conventional CT transformer which is provided with a simple voltage rectifier circuit. The power supply in the electric stabilizer unit is the most important component of every electric stabilizer. The power supply functions to provide a DC voltage supply for the entire system on the stabilizer unit.
At iVolt we have made a new breakthrough, now the controller board on the stabilizer unit is powered by a reliable Mean Well Dedicated Power Supply Unit. Mean Well Power Supply has high efficiency, long life and good performance. Supported by a wide input range, namely from 88-264 Vac, so that the DC voltage output for the controller board on the electric stabilizer is very smooth, stable and free from distortion.
The Bypass system is designed to be integrated into the stabilizer unit, now bypassing is easy, safe and practical. We reimagined the bypass system by using Easy Bypass, this system makes it much easier and safer for you to bypass when a problem occurs with the unit. You just need to select bypass or stabilizer mode. You can save, there is no need for additional costs to install bypass panels on your walls. And of course your walls will be more beautiful and clean without bypass panels.
The Emmerich stabilizer is designed not only to stabilize electric voltage, but also to provide full protection for the electrical equipment we use. iVolt is equipped with an under-over voltage protection feature, which will provide cut-off protection if the electrical voltage is too high or too low at the input voltage, thus providing protection for the electrical equipment we use. A new protection feature, namely Digital Overload Protection, is present in iVolt, if the stabilizer experiences an overload, the CPU will automatically send a signal to disconnect the stabilizer output from the electricity supply so that the stabilizer unit will be safe from the dangers of overloading.
The Emmerich series iVolt takes electric stabilizers to a new level with amazing performance. So much performance is obtained from this iVolt thanks to True Digital technology which is powered by an ARM® Cortex® chip
| Type | iVolt |
| Capacity | 10-20-30-40-50-60-80-100-120-150-200-250-300-400-500-600-800-1000-1200-1600-2000 kVA |
| Input Voltage | 304–456 V |
| Output Voltage | 380 V |
| Number of Phase | 3 phase + N |
| Rated Frequency | 50/60Hz |
| Output Accuracy | 1 - 3 - 5% (Adjustable) |
| Technology | True Digital |
| Control System | True Digital - DSP Solid State |
| CPU | ARM® Cortex® 32 bit |
| LCD Display | 5,1 inch ISFD Display |
| Bypass System | Easy Bypass |
| Protection | True Digital Protection |
| Delay Output | ADTO - Adjustable Delay Timer Output |
| Power Supply Unit | Dedicated PSU |
| Insulation | Class H |
| Response Time | < 0,01s |
| Correction Time | 40-80-120 ms (Adjustable) |
| Efficiency | >99% |
| Relative Humidity | 90% Non condensing |
| Protection Degree | IP 20 |
Product Design, specification, dimension and colour can be changed anytime without advance notice. Please contact your nearest dealer/store for more information and details
iDVM
Master Volt FT
iVolt
iDVM
Master Volt FT
Master Volt HT
iDVR